Ответ 1
Хорошо, я работаю над этим несколько дней, потому что меня очень расстроило странным образом, что Gmail называет/не помещает сообщения в разговорах.
Я действительно ошеломлен тем, что ярлыки автоматически не применяются к новым сообщениям в разговоре. Это совсем не отражено в пользовательском интерфейсе Gmail. Нет способа взглянуть на поток и определить, что метки применяются только к некоторым сообщениям в потоке, и вы не можете добавлять метки к одному сообщению в пользовательском интерфейсе. Когда я работал над моим script ниже, я заметил, что вы даже не можете программно добавлять метки к одному сообщению. Таким образом, на самом деле нет причин для текущего поведения.
С моей разглагольностью, у меня есть несколько заметок о script.
- Я вроде комбинировал код Saqib с кодом Сержа.
- script состоит из двух частей: начального запуска, который переносит все потоки с прикрепленной меткой пользователя и прогон обслуживания, который маркирует последние электронные письма (в настоящее время оглядывается назад на 4 дня). Выполняется только одна часть во время одного прогона. Как только начальный запуск будет завершен, будет выполняться только часть обслуживания. Вы можете установить триггер, чтобы он запускался один раз в день или более или менее часто, в зависимости от ваших потребностей.
- Начальный запуск останавливается через 4 минуты, чтобы не прерываться с помощью 5-минутного ограничения времени script. Он запускает триггер снова через 4 минуты (оба эти значения можно изменить с помощью констант в script). Триггер будет удален при следующем запуске.
- В разделе обслуживания нет проверки времени выполнения. Если за последние 4 дня у вас много писем, раздел обслуживания может попасть в ограничение времени script. Я мог бы, вероятно, изменить script, чтобы быть более эффективным здесь, но до сих пор это работало для меня, поэтому я не очень мотивирован, чтобы улучшить его.
- В первом прогоне есть инструкция try/catch, чтобы попытаться поймать "ошибку квоты на запись Gmail" и выйти изящно (т.е. записать текущий прогресс, чтобы его можно было забрать позже), но я не знаю, если он работает, потому что я не мог получить ошибку.
- Вы получите электронное письмо, когда достигнут срок, и когда начальный запуск завершен.
- По какой-то причине журнал не всегда полностью очищается между прогонами даже при использовании команды Logger.clear(). Таким образом, журналы состояния, которые он отправляет электронной почте пользователю, имеют больше, чем просто самую последнюю информацию о запуске. Я не знаю, почему это происходит.
Я использовал это для обработки 20 000 писем примерно за полчаса (включая время ожидания). Я фактически запускал его дважды, поэтому он обработал 40 000 писем за один день. Я полагаю, что предел чтения/записи Gmail в 10 000 не является тем, что здесь применяется (возможно, при применении метки к 100 потокам за один раз вместо одиночного события записи вместо 100?). Он пропускает около 5000 потоков в течение 4 минут, в соответствии с отправленным им адресом статуса.
Извините за длинные строки. Я обвиняю широкоформатные мониторы. Дайте мне знать, что вы думаете!
function relabelGmail() {
var startTime= (new Date()).getTime(); // Time at start of script
var BATCH=100; // total number of threads to apply label to at once.
var LOOKBACKDAYS=4; // Days to look back for maintenance section of script. Should be at least 2
var MAX_RUN_TIME=4*60*1000; // Time in ms for max execution. 4 minutes is a good start.
var WAIT_TIME=4*60*1000; // Time in ms to wait before starting the script again.
Logger.clear();
// ScriptProperties.deleteAllProperties(); return; // Uncomment this line and run once to start over completely
if(ScriptProperties.getKeys().length==0){ // this is to create keys on the first run
ScriptProperties.setProperties({'itemsProcessed':0, 'initFinished':false, 'lastrun':'20000101', 'itemsProcessedToday':0,
'currentLabel':'null-label-NOTREAL', 'currentLabelStart':0, 'autoTrig':0, 'autoTrigID':'0'});
}
var itemsP = Number(ScriptProperties.getProperty('itemsProcessed')); // total counter
var initTemp = ScriptProperties.getProperty('initFinished'); // keeps track of when initial run is finished.
var initF = (initTemp.toLowerCase() == 'true'); // Make it boolean
var lastR = ScriptProperties.getProperty('lastrun'); // String of date corresponding to itemsProcessedToday in format yyyymmdd
var itemsPT = Number(ScriptProperties.getProperty('itemsProcessedToday')); // daily counter
var currentL = ScriptProperties.getProperty('currentLabel'); // Label currently being processed
var currentLS = Number(ScriptProperties.getProperty('currentLabelStart')); // Thread number to start on
var autoT = Number(ScriptProperties.getProperty('autoTrig')); // Number to say whether the last run made an automatic trigger
var autoTID = ScriptProperties.getProperty('autoTrigID'); // Unique ID of last written auto trigger
// First thing: google terminates scripts after 5 minutes.
// If 4 minutes have passed, this script will terminate, write some data,
// and create a trigger to re-schedule itself to start again in a few minutes.
// If an auto trigger was created last run, it is deleted here.
if (autoT) {
var allTriggers = ScriptApp.getProjectTriggers();
// Loop over all triggers. If trigger isn't found, then it must have ben deleted.
for(var i=0; i < allTriggers.length; i++) {
if (allTriggers[i].getUniqueId() == autoTID) {
// Found the trigger and now delete it
ScriptApp.deleteTrigger(allTriggers[i]);
break;
}
}
autoT = 0;
autoTID = '0';
}
var today = dateToStr_();
if (today == lastR) { // If new day, reset daily counter
// Don't do anything
} else {
itemsPT = 0;
}
if (!initF) { // Don't do any of this if the initial run has been completed
var labels = GmailApp.getUserLabels();
// Find position of last label attempted
var curLnum=0;
for ( ; curLnum < labels.length; curLnum++) {
if (labels[curLnum].getName() == currentL) {break};
}
if (curLnum == labels.length) { // If label isn't found, start over at the beginning
curLnum = 0;
currentLS = 0;
itemsP=0;
currentL=labels[0].getName();
}
// Now start working through the labels until the quota is hit.
// Use a try/catch to stop execution if your quota has been hit.
// Google can actually automatically email you, but we need to clean up a bit before terminating the script so it can properly pick up again tomorrow.
try {
for (var i = curLnum; i < labels.length; i++) {
currentL = labels[i].getName(); // Next label
Logger.log('label: ' + i + ' ' + currentL);
var threads = labels[i].getThreads(currentLS,BATCH);
for (var j = Math.floor(currentLS/BATCH); threads.length > 0; j++) {
var currTime = (new Date()).getTime();
if (currTime-startTime > MAX_RUN_TIME) {
// Make the auto-trigger
autoT = 1; // So the auto trigger gets deleted next time.
var autoTrigger = ScriptApp.newTrigger('relabelGmail')
.timeBased()
.at(new Date(currTime+WAIT_TIME))
.create();
autoTID = autoTrigger.getUniqueId();
// Now write all the values.
ScriptProperties.setProperties({'itemsProcessed':itemsP, 'initFinished':initF, 'lastrun':today, 'itemsProcessedToday':itemsPT,
'currentLabel':currentL, 'currentLabelStart':currentLS, 'autoTrig':autoT, 'autoTrigID':autoTID});
// Send an email
var emailAddress = Session.getActiveUser().getEmail();
GmailApp.sendEmail(emailAddress, 'Relabel job in progress', 'Your Gmail Relabeller has halted to avoid termination due to excess ' +
'run time. It will run again in ' + WAIT_TIME/1000/60 + ' minutes.\n\n' + itemsP + ' threads have been processed. ' + itemsPT +
' have been processed today.\n\nSee the log below for more information:\n\n' + Logger.getLog());
return;
} else {
// keep on going
var len = threads.length;
Logger.log( j * BATCH + len);
labels[i].addToThreads(threads);
currentLS = currentLS + len;
itemsP = itemsP + len;
itemsPT = itemsPT + len;
threads = labels[i].getThreads( (j+1) * BATCH, BATCH);
}
}
currentLS = 0; // Reset LS counter
}
initF = true; // Initial run is done
} catch (e) { // Clean up and send off a notice.
// Write current values back to ScriptProperties
ScriptProperties.setProperties({'itemsProcessed':itemsP, 'initFinished':initF, 'lastrun':today, 'itemsProcessedToday':itemsPT,
'currentLabel':currentL, 'currentLabelStart':currentLS, 'autoTrig':autoT, 'autoTrigID':autoTID});
var emailAddress = Session.getActiveUser().getEmail();
var errorDate = new Date();
GmailApp.sendEmail(emailAddress, 'Error "' + e.name + '" in Google Apps Script', 'Your Gmail Relabeller has failed in the following stack:\n\n' +
e.stack + '\nThis may be due to reaching your daily Gmail read/write quota. \nThe error message is: ' +
e.message + '\nThe error occurred at the following date and time: ' + errorDate + '\n\nThus far, ' +
itemsP + ' threads have been processed. ' + itemsPT + ' have been processed today. \nSee the log below for more information:' +
'\n\n' + Logger.getLog());
return;
}
// Write current values back to ScriptProperties. Send completion email.
ScriptProperties.setProperties({'itemsProcessed':itemsP, 'initFinished':initF, 'lastrun':today, 'itemsProcessedToday':itemsPT,
'currentLabel':currentL, 'currentLabelStart':currentLS, 'autoTrig':autoT, 'autoTrigNumber':autoTID});
var emailAddress = Session.getActiveUser().getEmail();
GmailApp.sendEmail(emailAddress, 'Relabel job completed', 'Your Gmail Relabeller has finished its initial run.\n' +
'If you continue to run the script, it will skip the initial run and instead relabel ' +
'all emails from the previous ' + LOOKBACKDAYS + ' days.\n\n' + itemsP + ' threads were processed. ' + itemsPT +
' were processed today. \nSee the log below for more information:' + '\n\n' + Logger.getLog());
return; // Don't run the maintenance section after initial run finish
} // End initial run section statement
// Below is the 'maintenance' section that will be run when the initial run is finished. It finds all new threads
// (as defined by LOOKBACKDAYS) and applies any existing labels to all messages in each thread. Note that this
// won't miss older threads that are labeled by the user because all messages in a thread get the label
// when the label action is first performed. If another message is then sent or received in that thread,
// then this maintenance section will find it because it will be deemed a "new" thread at that point.
// You may need to search further back the first time you run this if it took more than 3 days to finish
// the initial run. For general maintenance, though, 4 days should be plenty.
// Note that I have not implemented a script-run-time check for this section.
var threads = GmailApp.search('newer_than:' + LOOKBACKDAYS + 'd', 0, BATCH); //
var len = threads.length;
for (var i=0; len > 0; i++) {
for (var t = 0; t < len; t++) {
var labels = threads[t].getLabels();
for (var l = 0; l < labels.length; l++) { // Add each label to the thread
labels[l].addToThread(threads[t]);
}
}
itemsP = itemsP + len;
itemsPT = itemsPT + len;
threads = GmailApp.search('newer_than:' + LOOKBACKDAYS + 'd', (i+1) * BATCH, BATCH);
len = threads.length;
}
// Write the property data
ScriptProperties.setProperties({'itemsProcessed':itemsP, 'initFinished':initF, 'lastrun':today, 'itemsProcessedToday':itemsPT,
'currentLabel':currentL, 'currentLabelStart':currentLS, 'autoTrig':autoT, 'autoTrigID':autoTID});
}
// Takes a date object and turns it into a string of form yyyymmdd
function dateToStr_(dateObj) { //takes in a date object, but uses current date if not a date
if (!(dateObj instanceof Date)) {
dateObj = new Date();
}
var dd = dateObj.getDate();
var mm = dateObj.getMonth()+1; //January is 0!
var yyyy = dateObj.getFullYear();
if(dd<10){dd='0'+dd};
if(mm<10){mm='0'+mm};
dateStr = ''+yyyy+mm+dd;
return dateStr;
}
Изменить: 3/24/2017 Думаю, я должен включить уведомления или что-то еще, потому что я никогда не видел вопроса от user29020. В случае, если у кого-то будет один и тот же вопрос, вот что я делаю: я запускаю его как функцию обслуживания, устанавливая ежедневный триггер для запуска каждую ночь между 1 и 2 утрами.
Дополнительное примечание. Похоже, что в какой-то момент в прошлом году маркировка звонков в Gmail значительно замедлилась. Теперь он занимает около 0,2 секунды на поток, поэтому я ожидаю, что первоначальный запуск 20-килограммовых электронных писем займет не менее 20 прогонов до того, как он пройдет весь путь. Это также означает, что если вы обычно получаете более 100-200 писем в день, раздел обслуживания может также занять слишком много времени и начать сбой. Теперь, когда много писем, но я готов поспорить, есть некоторые люди, которые получают это много, и кажется гораздо более вероятным, что вы ударите его, чем 1000 или около того ежедневных писем, которые были бы необходимы для отказа, когда я впервые написал script.
В любом случае, одним из смягчений будет уменьшение LOOKBACKDAYS до менее 4, но я бы не рекомендовал помещать его меньше 2.