Ios Google Cloud Messaging (GCM) не получает удаленные уведомления

Проблема:
iOS не получает никаких удаленных уведомлений от GCM, но не может найти никакой информации о том, почему это будет так. Первый раз, когда вы вводите push-уведомления, не знаете, в чем причина проблемы.

Ситуация:
В настоящее время я работаю над версией iOS для приложения, которое использует GCM для push-уведомлений. Уведомления на тонкой основе получаются на Android, однако он, похоже, не получает вообще на iOS.

Когда я запускаю приложение, консоль показывает мне, что все в порядке, имеет токен, подключенный к GCM и подписанный на темы

app [579: 45511] Регистрационный токен: bk3RNwTe3H0: CI2k_HHwgIpoDKCIZvvDMExUdFQ3P1pLTQ/8Т-5QNiXbYwZYEWiSFD-frQKlsV8lgI
приложение [579: 45511] Подключено к GCM
приложение [579: 45511] Уже подписано на /themes/global

Однако он не получает никаких уведомлений, и когда я вытаскиваю Центр уведомлений или вытягиваю Центр управления, в консоли появляется следующее сообщение

app [579: 45511] Не удалось подключиться к GCM: операция не может быть завершена. (ошибка com.google.gcm 2001.)

который не говорит мне ничего, кроме ссылки на...

///Отсутствует KeyPair.
 kGGLInstanceIDOperationErrorCodeMissingKeyPair = 2001,

С другой стороны, когда я отправляю его на задний план с функцией многозадачности и верну его, я снова получаю это:

приложение [579: 45511] Подключено к GCM
приложение [579: 45511] Уже подписано на /themes/global

Настройка:
Я выполнил инструкции GCM для настройки в iOS и даже упомянул GcmExample.xcodeproj для реализации (до такой степени, что код такой же).

Установите для параметра info.plist значение "Необходимые фоновые режимы" → "Приложение загружает контент в ответ на push-уведомления"

Перешел к другому вопросу о стеке (не удалось найти сейчас) о том, что GCM и IP-адреса не являются белыми, но решили, что это не проблема.

Код:

#import "AppDelegate.h"

@interface AppDelegate ()

@property(nonatomic, strong) void (^registrationHandler) (NSString *registrationToken, NSError *error);
@property(nonatomic, assign) BOOL connectedToGCM;
@property(nonatomic, strong) NSString* registrationToken;
@property(nonatomic, assign) BOOL subscribedToTopic;

@end

NSString *const SubscriptionTopic = @"/topics/global";

@implementation AppDelegate

- (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions {
  // Override point for customization after application launch.

  // [START_EXCLUDE]
  _registrationKey = @"onRegistrationCompleted";
  _messageKey = @"onMessageReceived";
  // Configure the Google context: parses the GoogleService-Info.plist, and initializes
  // the services that have entries in the file
  NSError* configureError;
  [[GGLContext sharedInstance] configureWithError:&configureError];
  if (configureError != nil) {
    NSLog(@"Error configuring the Google context: %@", configureError);
  }
  _gcmSenderID = [[[GGLContext sharedInstance] configuration] gcmSenderID];
  // [END_EXCLUDE]
  // Register for remote notifications
  UIUserNotificationType allNotificationTypes =
  (UIUserNotificationTypeSound | UIUserNotificationTypeAlert | UIUserNotificationTypeBadge);
  UIUserNotificationSettings *settings =
  [UIUserNotificationSettings settingsForTypes:allNotificationTypes categories:nil];
  [[UIApplication sharedApplication] registerUserNotificationSettings:settings];
  [[UIApplication sharedApplication] registerForRemoteNotifications];
  // [END register_for_remote_notifications]
  // [START start_gcm_service]
  [[GCMService sharedInstance] startWithConfig:[GCMConfig defaultConfig]];
  // [END start_gcm_service]
  __weak typeof(self) weakSelf = self;
  // Handler for registration token request
  _registrationHandler = ^(NSString *registrationToken, NSError *error){
    if (registrationToken != nil) {
      weakSelf.registrationToken = registrationToken;
      NSLog(@"Registration Token: %@", registrationToken);
      [weakSelf subscribeToTopic];
      NSDictionary *userInfo = @{@"registrationToken":registrationToken};
      [[NSNotificationCenter defaultCenter] postNotificationName:weakSelf.registrationKey
                                                          object:nil
                                                        userInfo:userInfo];
    } else {
      NSLog(@"Registration to GCM failed with error: %@", error.localizedDescription);
      NSDictionary *userInfo = @{@"error":error.localizedDescription};
      [[NSNotificationCenter defaultCenter] postNotificationName:weakSelf.registrationKey
                                                          object:nil
                                                        userInfo:userInfo];
    }
  };

  [[NSNotificationCenter defaultCenter] postNotificationName:_messageKey
                                                      object:nil
                                                    userInfo:nil];
  return YES;
}

- (void)subscribeToTopic {
  // If the app has a registration token and is connected to GCM, proceed to subscribe to the
  // topic
  if (_registrationToken && _connectedToGCM) {
    [[GCMPubSub sharedInstance] subscribeWithToken:_registrationToken
                                             topic:SubscriptionTopic
                                           options:nil
                                           handler:^(NSError *error) {
                                             if (error) {
                                               // Treat the "already subscribed" error more gently
                                               if (error.code == 3001) {
                                                 NSLog(@"Already subscribed to %@",
                                                       SubscriptionTopic);
                                               } else {
                                                 NSLog(@"Subscription failed: %@",
                                                       error.localizedDescription);
                                               }
                                             } else {
                                               self.subscribedToTopic = true;
                                               NSLog(@"Subscribed to %@", SubscriptionTopic);
                                             }
                                           }];
  }
}

- (void)applicationWillResignActive:(UIApplication *)application {
  // Sent when the application is about to move from active to inactive state. This can occur for certain types of temporary interruptions (such as an incoming phone call or SMS message) or when the user quits the application and it begins the transition to the background state.
  // Use this method to pause ongoing tasks, disable timers, and throttle down OpenGL ES frame rates. Games should use this method to pause the game.
}

// [START disconnect_gcm_service]
- (void)applicationDidEnterBackground:(UIApplication *)application {
  // Use this method to release shared resources, save user data, invalidate timers, and store enough application state information to restore your application to its current state in case it is terminated later.
  // If your application supports background execution, this method is called instead of applicationWillTerminate: when the user quits.

  [[GCMService sharedInstance] disconnect];
  // [START_EXCLUDE]
  _connectedToGCM = NO;
  // [END_EXCLUDE]
}
// [END disconnect_gcm_service]

- (void)applicationWillEnterForeground:(UIApplication *)application {
  // Called as part of the transition from the background to the active state; here you can undo many of the changes made on entering the background.
}

- (void)applicationDidBecomeActive:(UIApplication *)application {
  // Restart any tasks that were paused (or not yet started) while the application was inactive. If the application was previously in the background, optionally refresh the user interface.

  // Connect to the GCM server to receive non-APNS notifications
  [[GCMService sharedInstance] connectWithHandler:^(NSError *error) {
    if (error) {
      NSLog(@"Could not connect to GCM: %@", error.localizedDescription);
    } else {
      _connectedToGCM = true;
      NSLog(@"Connected to GCM");
      // [START_EXCLUDE]
      [self subscribeToTopic];
      // [END_EXCLUDE]
    }
  }];
}
// [END connect_gcm_service]

- (void)applicationWillTerminate:(UIApplication *)application {
  // Called when the application is about to terminate. Save data if appropriate. See also applicationDidEnterBackground:.
}


// [START receive_apns_token]
- (void)application:(UIApplication *)application didRegisterForRemoteNotificationsWithDeviceToken:(NSData *)deviceToken {
  // [END receive_apns_token]
  // [START get_gcm_reg_token]
  // Start the GGLInstanceID shared instance with the default config and request a registration
  // token to enable reception of notifications
  [[GGLInstanceID sharedInstance] startWithConfig:[GGLInstanceIDConfig defaultConfig]];
  _registrationOptions = @{kGGLInstanceIDRegisterAPNSOption:deviceToken,
                           kGGLInstanceIDAPNSServerTypeSandboxOption:@YES};
  [[GGLInstanceID sharedInstance] tokenWithAuthorizedEntity:_gcmSenderID
                                                      scope:kGGLInstanceIDScopeGCM
                                                    options:_registrationOptions
                                                    handler:_registrationHandler];
  // [END get_gcm_reg_token]
}

// [START receive_apns_token_error]
- (void)application:(UIApplication *)application didFailToRegisterForRemoteNotificationsWithError:(NSError *)error {
  NSLog(@"Registration for remote notification failed with error: %@", error.localizedDescription);
  // [END receive_apns_token_error]
  NSDictionary *userInfo = @{@"error" :error.localizedDescription};
  [[NSNotificationCenter defaultCenter] postNotificationName:_registrationKey
                                                      object:nil
                                                    userInfo:userInfo];
}

- (void)application:(UIApplication *)application didReceiveRemoteNotification:(NSDictionary *)userInfo {
  NSLog(@"Notification received: %@", userInfo);
  // This works only if the app started the GCM service
  [[GCMService sharedInstance] appDidReceiveMessage:userInfo];
  // Handle the received message
  // [START_EXCLUDE]
  [[NSNotificationCenter defaultCenter] postNotificationName:_messageKey
                                                      object:nil
                                                    userInfo:userInfo];
  // [END_EXCLUDE]
}

- (void)application:(UIApplication *)application didReceiveRemoteNotification:(NSDictionary *)userInfo fetchCompletionHandler:(void (^)(UIBackgroundFetchResult))handler {
  NSLog(@"Notification received: %@", userInfo);
  // This works only if the app started the GCM service
  [[GCMService sharedInstance] appDidReceiveMessage:userInfo];
  // Handle the received message
  // Invoke the completion handler passing the appropriate UIBackgroundFetchResult value
  // [START_EXCLUDE]
  [[NSNotificationCenter defaultCenter] postNotificationName:_messageKey
                                                      object:nil
                                                    userInfo:userInfo];
  handler(UIBackgroundFetchResultNoData);
  // [END_EXCLUDE]
}
// [END ack_message_reception]

// [START on_token_refresh]
- (void)onTokenRefresh {
  // A rotation of the registration tokens is happening, so the app needs to request a new token.
  NSLog(@"The GCM registration token needs to be changed.");
  [[GGLInstanceID sharedInstance] tokenWithAuthorizedEntity:_gcmSenderID
                                                      scope:kGGLInstanceIDScopeGCM
                                                    options:_registrationOptions
                                                    handler:_registrationHandler];
}
// [END on_token_refresh]

@end

UPDATE
backend php code для отправки сообщения GCM

//------------------------------
// Payload data you want to send 
// to Android device (will be
// accessible via intent extras)
//------------------------------
$msg = addslashes($_POST["msg"]);

//------------------------------
// The recipient registration IDs
// that will receive the push
// (Should be stored in your DB)
// 
// Read about it here:
// http://developer.android.com/google/gcm/
//------------------------------

//------------------------------
// Call our custom GCM function
//------------------------------

sendGoogleCloudMessage( $msg );
echo "send";

//------------------------------
// Define custom GCM function
//------------------------------

function sendGoogleCloudMessage( $msg )
{
    //------------------------------
    // Replace with real GCM API 
    // key from Google APIs Console
    // 
    // https://code.google.com/apis/console/
    //------------------------------

    $apiKey = 'abc';

    //------------------------------
    // Define URL to GCM endpoint
    //------------------------------

    $url = 'https://android.googleapis.com/gcm/send';

    //------------------------------
    // Set CURL request headers
    // (Authentication and type)
    //------------------------------

    $headers = array( 
                        'Authorization: key=' . $apiKey,
                        'Content-Type: application/json'
                    );

    //------------------------------
    // Initialize curl handle
    //------------------------------

    $ch = curl_init();

    //------------------------------
    // Set URL to GCM endpoint
    //------------------------------

    curl_setopt( $ch, CURLOPT_URL, $url );

    //------------------------------
    // Set request method to POST
    //------------------------------

    curl_setopt( $ch, CURLOPT_POST, true );

    //------------------------------
    // Set our custom headers
    //------------------------------

    curl_setopt( $ch, CURLOPT_HTTPHEADER, $headers );

    //------------------------------
    // Get the response back as 
    // string instead of printing it
    //------------------------------

    curl_setopt( $ch, CURLOPT_RETURNTRANSFER, true );

    //------------------------------
    // Set post data as JSON
    //------------------------------

    $post_json_encode = '{"data":{"message":"' . $msg . '"},"to":"/topics/global"}';

    curl_setopt( $ch, CURLOPT_POSTFIELDS, $post_json_encode );

    //------------------------------
    // Actually send the push!
    //------------------------------

    $result = curl_exec( $ch );

    //------------------------------
    // Error? Display it!
    //------------------------------

    if ( curl_errno( $ch ) )
    {
        echo 'GCM error: ' . curl_error( $ch );
    }

    //------------------------------
    // Close curl handle
    //------------------------------

    curl_close( $ch );

    //------------------------------
    // Debug GCM response
    //------------------------------
    $arr_result =   json_decode($result, true);
    foreach ($arr_result as $name => $value) {
        echo "<p>".$name .": ". $value ."</p>";
    }
}

Ответы

Ответ 1

Ошибка 2001, которую вы получаете, НЕ kGGLInstanceIDOperationErrorCodeMissingKeyPair, а скорее kGCMServiceErrorCodeAlreadyConnected. Последнее означает, что вы уже подключены к GCM. Чтобы лучше отладить это, я попытался бы отправить уведомление на дисплей на токен устройства, то есть отправьте это

$post_json_encode = '{ "notification": { "body": "'. $msg. '" }, "До": "/темы/глобальное" };

Теоретически вы должны подключиться к GCM, когда ваше приложение находится на переднем плане и отключается при переходе на задний план. Затем вы можете снова подключиться, когда вы перейдете на передний план.

data payload и notification payload применимы для iOS и Android. В iOS разница заключается в том, что полезная нагрузка уведомления отправляется через APNS, тогда как полезная нагрузка данных отправляется через собственное соединение GCM, которое существует только там, где приложение находится на переднем плане. В Android-уведомлении полезная нагрузка - это новый материал для отображения, добавленный недавно.

Ответ 2

Я столкнулся с той же проблемой в iOS. Затем я нашел решение на сайте PushBots. Теперь он работает отлично.

В XCode перейдите в Цели > Настройки сборки > Идентификация кода и убедитесь, что он не является автоматическим и установлен для сертификата соответствия профиля, связанного с идентификатором приложения, например